uScope DX Replacing the Illuminator LED
uScope DX (Discontinued)

Information in this article applies to:

  • uScopeDX (All Models)

Article ID: DXA1243 — Created: 29 Mar 2019 — Reviewed: 29 Mar 2019


If one of the illuminators on the uScopeDX burns out, is it possible to replace it?


Yes. However, changing the illuminator requires factory re-alignment of the illuminator and re-calibration of the uScope. This is covered under the standard maintenance agreement for your uScope.

The LED is not a user-service item nor can it be replaced without re-aligning and re-calibrating the uScope.

We use LEDs that are designed with a typical life of 20,000 hours. You should be able to scan many thousands of slides with the supplied illuminator.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.