uScope GX uScopeGX Step Size Calculator
uScope GX

Information in this article applies to:

  • uScopeGX (Model GX2D)

Article ID: GXA1207 — Created: 13 May 2018 — Reviewed: 2 May 2021


There are a number of places in the uScope Navigator application that allow you to change the step size or range used when focusing the objective on the uScopeGX.

Each step is approximately 0.1984 microns.


The following calculator converts focus steps into the equivalent number of microns (1/1000 mm).

uScopeGX models with serial numbers starting with G2E use a different step size calculation. Refer to uScopeGX Step Size Calculator (for G2E Serial Numbers) for more information.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.