Information in this article applies to:
Article ID: GXA1243 — Created: 29 Mar 2019 — Reviewed: 29 Mar 2019
If one of the illuminators on the uScopeGX burns out, is it possible to replace it?
Yes. However, changing the illuminator requires factory re-alignment of the illuminator and re-calibration of the uScope. This is covered under the standard maintenance agreement for your uScope.
The LED is not a user-service item nor can it be replaced without re-aligning and re-calibrating the uScope.
We use LEDs that are designed with a typical life of 20,000 hours. You should be able to scan many thousands of slides with the supplied illuminator.
Thanks for subscribing to this knowledge base article.
You will receive an email confirmation with a confirmation link. You must click the link to receive update notifications for this knowledge base article.
You are already subscribed to this knowledge base article.
It looks like you are already subscribed to this knowledge base article.