Support
Firmware A15.016 Upgrade Fails
uScope GX
Information in this article applies to:
- uScopeGX (Model GX2D) and Later
Article ID: GXA2341 — Created: 28 Oct 2020 — Reviewed: 17 Nov 2020
Symptom
Upgrading platform firmware from A15.016 proceeds as though firmware is being updated but the version number does not change.
Cause
On some rare ocassions, firmware version A15.016 prevents upgrades on some machines.
Resolution
There is no known resolutions at this time. Fortunately, subsequent upgrades have no effect on the operation of the uScopeGX.
Related Articles
- uScope Flash Memory
uScope GX - Power off uScopeGX when not in use?
uScope GX - Recalibrate Analyzer Position
uScope GX
Rate This Article
Home 
Support Knowledge Base uScope GX Firmware A15.016 Upgrade Fails
Support Knowledge Base uScope GX Firmware A15.016 Upgrade FailsContact Microscopes International or speak with your local distributor.
Copyright © Microscopes International, LLC. All rights reserved.