Support

uScope GX uScopeGX Step Size Calculator (for G2E Serial Numbers)
uScope GX

Information in this article applies to:

  • uScopeGX (Model GX2E)

Article ID: GXA2382 — Created: 19 Apr 2021 — Reviewed: 2 May 2021

Summary

There are a number of places in the uScope Navigator application that allow you to change the step size or range used when focusing the objective on the uScopeGX.

Each step is approximately 0.396875 microns.

Notes

The following calculator may be used for the uScopeGX with serial numbers starting with G2E. uScopeGX models with serial numbers beginning with G2D use a different step size calculation—refer to uScopeGX Step Size Calculator.

Details

The following calculator converts focus steps into the equivalent number of microns (1/1000 mm).

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2021 Microscopes International, LLC. All rights reserved.