Support

uScope HXII uScopeHXII Step Size Calculator
uScope HXII

Information in this article applies to:

  • uScopeHXII (Model HX2C) and Later

Article ID: HXB1207 — Created: 13 May 2018 — Reviewed: 2 May 2021

Summary

There are a number of places in the uScope Navigator application that allow you to change the step size or range used when focusing the objective on the uScopeHXII.

Each step is approximately 0.1984 microns.

Details

The following calculator converts focus steps into the equivalent number of microns (1/1000 mm).

Note
uScopeGX models with serial numbers starting with G2E use a different step size calculation. Refer to uScopeGX Step Size Calculator (for G2E Serial Numbers) for more information.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2021 Microscopes International, LLC. All rights reserved.