Support

uScope HXII Power off uScopeHXII when not in use?
uScope HXII

Information in this article applies to:

  • uScopeHXII (All Models)

Article ID: HXB1288 — Created: 4 Sep 2019 — Reviewed: 11 Dec 2022

Question

When my uScopeHXII is not in use, should I power it off or is is safe to leave it on all the time?

Answer

In most cases, it is perfectly safe to leave the uScopeHXII powered on all the time.

However, if your power source is subject to brownouts or is otherwise unstable (power switches on and off several times) you should leave the uScopeHXII powered off when not in use.

  • We recommend that you exit the uScope Navigator software before powering the uScope down. Updates to the uScope configuration are written to the uScope's internal Flash memory when you exit uScope Navigator.
  • After exiting uScope Navigator, we recommend waiting five (5) seconds before powering down the uScope.

Note
If you are able to use power from a UPS or other filtered, battery-backed power source, you may safely leave the uScopeHXII powered on full-time.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.