Support

uScope MXII Removing a Slide from the uScopeMXII
uScope MXII

Information in this article applies to:

  • uScopeMXII (All Models)
  • uScope Navigator V4.0 and Later

Article ID: MXB1312 — Created: 2 Jul 2020 — Reviewed: 5 Jul 2020

Question

How do I remove my slide from the uScopeMXII once I am done scanning?

Answer

To eject the slide from the uScope, you must click the Unload Slide button in the uScope Navigator software application. This halts all operations and moves the uScope stage to the eject position where the slide can be removed.

Once the slide has been ejected, the following message appears on the uScope Control Panel in the uScope Navigator application:

Slide Ejected. Insert another slide and select Load Slide.

If this message does not appear on the uScope Control Panel, the slide has not been ejected and may not be removed from the uScope.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.