Support

uScope Navigator (Browse)

Unable to Navigate to Bottom of Overview when Browsing
uScope Navigator (Browse)

Article ID: NBR1064
Created: 18 Jul 2017
Reviewed: 20 Aug 2017

Information in this article applies to:

  • uScope Navigator (All Versions)

Symptom

When navigating around the overview image, I am unable to move the objective to the bottom half of the slide. When I try to use the cursor keys or navigation arrows to move the objective below the middle of the overview image, movement is halted somewhere near the middle of the slide.

Cause

This problem only occurs on a very few units. It is caused by a calibration value that was incorrectly generated.

Resolution

Fortunately, we can solve this problem over the phone or via email. Please contact our technical support department for more information.

Related Articles

Contact Microscopes International or speak with your local distributor.
Copyright © 2017 Microscopes International, LLC. All rights reserved.