Support

uScope Navigator (Browse)

How to Switch Camera Mode (SD/HD) while Browsing
uScope Navigator (Browse)

Information in this article applies to:

  • uScope Navigator V4.3 and Later

Article ID: NBR1094 — Created: 20 Nov 2017 — Reviewed: 17 May 2018

Question

How do I switch the camera from SD to HD mode while browsing a slide?

Answer

Changing Camera Mode While BrowsingStarting in uScope Navigator v4.3, a new control is available that allows you to switch camera modes while browsing.

To change the camera from one mode to another, select the desired camera mode from the drop-down menu.

  • SD Camera Mode
    The SD (Standard Definition) camera mode is the default camera resolution (960×540). This is the fastest camera mode for slide scanning (about four times faster than HD mode).
  • HD Camera Mode
    The HD (High Definition) camera mode is the high-resolution camera resolution (1920×1080). This is the highest resolution camera mode but it is much slower than SD mode when scanning slides.

Related Articles

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2018 Microscopes International, LLC. All rights reserved.