Support
Disable Image Scale Indicator
Browse Mode
Information in this article applies to:
- uScope Navigator V4.3 and Later
Article ID: NBR1279 — Created: 16 Aug 2019 — Reviewed: 16 Aug 2019
Question
How do I enable or disable the scale indicator when browsing a slide?
Answer
To enable or disable the scale indicator...
- Open the Slide-in Panel by clicking ... in the top right corner of the Browse Mode screen.
- Click the Show Scale Indicator switch in the Slide-in Panel to enable (on) or disable (off) the scale indicator.
When enabled, the scale indicator appears in the browser window as shown below.
Related Articles
- How to Change the Objective Camera Mode
Browse Mode - How to Apply Gamma Correction to Images
Browse Mode - Saved Images Path Not Applied to Save/Load Images
Program Settings
Rate This Article
Home 
Support Knowledge Base Browse Mode Disable Image Scale Indicator
Support Knowledge Base Browse Mode Disable Image Scale IndicatorContact Microscopes International or speak with your local distributor.
Copyright © Microscopes International, LLC. All rights reserved.