Support
JPEG Images Saved with Q85 Instead of Q90
Browse Mode
Information in this article applies to:
- uScope Navigator V4.5 and Earlier
Article ID: NBR2331 — Created: 14 Oct 2020 — Reviewed: 17 Nov 2020
Summary
JPEG images should be saved with Q90 but are saved with Q85 instead.
Details
This is a known problem in uScope Navigator v4.5 and earlier. It has been corrected in uScope Navigator v4.6.
Note
This problem created images that were slightly lower quality than they should have been. However, the difference between Q85 and Q90 are likely not noticeable by most users.
Related Articles
- Poor Stitching on All Scans
Whole Scan Images - What is a pyramidal image?
Deep Zoom Images - Field Image Format vs Deep Zoom Tile Format
Program Settings
Rate This Article
Home 
Support Knowledge Base Browse Mode JPEG Images Saved with Q85 Instead of Q90
Support Knowledge Base Browse Mode JPEG Images Saved with Q85 Instead of Q90Contact Microscopes International or speak with your local distributor.
Copyright © Microscopes International, LLC. All rights reserved.