Device Settings Can Auto-Focus Settings Be Changed?
Device Settings

Information in this article applies to:

  • uScope Navigator V4.3 and Later

Article ID: NDS1128 — Created: 10 Jan 2018 — Reviewed: 5 Sep 2019


Is it possible to adjust the auto-focus settings?


Starting in uScope Navigator v4.3, auto-focus settings are available under the Device Settings dialog and may be changed by the end user. Prior to uScope Navigator v4.3, these settings were fixed and could not be changed.

Refer to the following knowledge base article for details on these settings:

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.