Device Settings Changing X/Y/Z Settle Time
Device Settings

Information in this article applies to:

  • uScope Navigator V4.3 and Later

Article ID: NDS1299 — Created: 17 Jan 2020 — Reviewed: 16 Nov 2020


Changing X/Y/Z Settle Time in the hidden device settings page has no effect.


This is correct behavior for uScope Navigator v4.5 and earlier. You must exit and restart the uScope Navigator software for these changes to become effective.

uScope Navigator v4.6 and later make settle time changes effective immediately with no need to restart the uScope Navigator software.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.