Support
Improved Camera Calibration Speed
Device Settings
Information in this article applies to:
- uScope Navigator V4.6 and Later
Article ID: NDS1316 — Created: 1 Jun 2020 — Reviewed: 17 Nov 2020
Summary
Camera calibration updates the camera white balance and acquires a blank field image. It typically takes about ten (10) seconds to complete.
uScope Navigator v4.6 improves the performance of camera calibration and now completes in around three (3) seconds.
More Information
Related Articles
- Factory Default Settings
Device Settings - Saving Factory Default Settings in uScope Flash
Device Settings - Region Scans have Dropped Frames
Scan Mode
Rate This Article
Home 
Support Knowledge Base Device Settings Improved Camera Calibration Speed
Support Knowledge Base Device Settings Improved Camera Calibration SpeedContact Microscopes International or speak with your local distributor.
Copyright © Microscopes International, LLC. All rights reserved.