Deep Zoom Images Default Deep Zoom Options
Deep Zoom Images

Information in this article applies to:

  • uScope Navigator V4.3

Article ID: NDZ1145 — Created: 5 Feb 2018 — Reviewed: 6 Dec 2020


Create Deep Zoom Dialog After installing uScope Navigator 4.3, I am unable to create a Deep Zoom image using the default settings after scanning a slide.

The default settings do not seem to be set to create a Deep Zoom image.


You are correct. This issue is caused by default Deep Zoom settings that do not create a Deep Zoom image set.


Deep Zoom Options (Before Changes) The default Deep Zoom settings include a potentially unnecessary pre-process and exclude an output image. For most scans, the best starting point includes the following settings:

  • — Filter: --None--
  • Post-Process: --None--
  • Output Formats: Open SeaDragon

In addition to the Open SeaDragon format, you may wish to create a Tiled TIF (SVS) image as well.

Deep Zoom Options (After Changes) You can change the default settings for the Create Deep Zoom dialog from the Program Settings — Deep Zoom Options dialog to meet your requirements.

Starting in uScope Navigator v4.5, the Open Seadragon format was renamed Deep Zoom as this is the actual output file format used. Open Seadragon is simply the image viewer.

Related Articles

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.