Support

uScope Navigator (Filter Manager) Where are Flat-Field Correction Images saved?
uScope Navigator (Filter Manager)

Information in this article applies to:

  • uScope Navigator V4.0 and Later

Article ID: NFL1214 — Created: 6 Jun 2018 — Reviewed: 6 Jun 2018

Question

Where are the flat-field correction images stored?

Answer

Each uScope has its own unique settings that are stored in a folder named Dev-000xxxxxxxx (yyyyyy) where xxxxxxxx is the Device ID and yyyyyy is the Serial Number of the uScope. These folders are stored in the following location:

C:\ProgramData\Microscopes International\uScopeNavigator4

Separate flat-field correction images are saved for each mode of each camera. Each camera has its own folder where flat-field images are saved.

  • C:\ProgramData\Microscopes International\uScopeNavigator4\Dev-000xxxxxxxx (yyyyyy)\Overview
    This folder contains the flat-field image for the overview camera. The overview camera only operates in HD mode so there should only be one image in this folder.
  • C:\ProgramData\Microscopes International\uScopeNavigator4\Dev-000xxxxxxxx (yyyyyy)\Objective1
    This folder contains the SD and HD flat-field images for the objective (on uScopeMXII and uScopeHXII devices) or the first objective (on uScopeDX and uScopeGX devices).
  • C:\ProgramData\Microscopes International\uScopeNavigator4\Dev-000xxxxxxxx (yyyyyy)\Objective2
    This folder contains the SD and HD flat-field images for the second objective on uScopeDX and uScopeGX devices.

Related Articles

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2018 Microscopes International, LLC. All rights reserved.