Support

uScope Navigator (General) What Information Appears on the Device Info Tab?
uScope Navigator (General)

Information in this article applies to:

  • uScope Navigator V4.3 and Later

Article ID: NGN1098 — Created: 14 Nov 2017 — Reviewed: 20 Nov 2017

Question

What information displays on the Device Information tab for the selected uScope scanner?

Answer

Device Information TabThe following information appears on the Device Information tab:

  • uScope Model Number
  • Serial Number
  • Objective(s)
    The magnification of the objective(s) is displayed.
  • Device ID Number
    The device ID number is a hardware ID assigned to each uScope.
  • User-Assigned Name for the uScope
    You may assign a friendly name to each uScope. This is useful when you have more than one uScope connected to your desktop computer.
  • Firmware Version Information
    The version of firmware programmed into the Camera and Motion processors in the uScope scanner is read from the uScope and displayed here.
  • Internal Unit Temperature
    The uScope monitors internal temperature to insure the unit is operating within temperature specifications.

Related Articles

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2018 Microscopes International, LLC. All rights reserved.