Support
Saved Images Path Not Applied to Save/Load Images
Program Settings
Information in this article applies to:
- uScope Navigator V4.3
Article ID: NPF1143 — Created: 3 Feb 2018 — Reviewed: 13 Aug 2019
Symptom
The Saved Images Path setting under Program Options — Application Preferences is not used in the following locations:
- Saving Field Image when Browsing a Slide
- Loading a Test Image when Creating a Filter
Cause
This problem is caused by an oversight in selecting the configured folder.
Resolution
Currently, you must manually select the desired folder when saving browsed images or when loading filter test images.
This problem is resolved in uScope Navigator v4.5.
Related Articles
- Factory Default Settings
Device Settings - Saving Factory Default Settings in uScope Flash
Device Settings - Field Image Format vs Deep Zoom Tile Format
Program Settings
Rate This Article
Home 
Support Knowledge Base Program Settings Saved Images Path Not Applied to Save/Load Images
Support Knowledge Base Program Settings Saved Images Path Not Applied to Save/Load ImagesContact Microscopes International or speak with your local distributor.
Copyright © Microscopes International, LLC. All rights reserved.