Support

Scan Mode Multi-Layer Scan Issues
Scan Mode

Information in this article applies to:

  • uScope Navigator V4.6
  • uScope Navigator V4.6.0.1 and Later

Article ID: NSC2368 — Created: 11 Mar 2021 — Reviewed: 29 Mar 2021

Symptom

Several issues relating to Multi-Layer (Image Stacking or Z-Stack) scans have been discovered in uScope Navigator v4.6.

  • Multi-Layer Scans with multiple regions fail to generate Whole Scan Images correctly.
  • Multi-Layer Scans perform an automatoc focus (but, they should not do so) when device settings were so configured.
  • On occasion, when completing a multi-layer scan, uScope Navigator reports that the Whole Scan Image already exists.

Cause

These problems are caused by bugs in the uScope Navigator v4.6 application.

Resolution

Each of these problems is corrected in uScope Navigator v4.6.0.1.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2021 Microscopes International, LLC. All rights reserved.