Image Viewer Whole-Scan Image for Non-Overlapped Fields
Image Viewer

Information in this article applies to:

  • uScope Navigator V4.5 and Later

Article ID: NVW1309 — Created: 1 Jun 2020 — Reviewed: 15 Dec 2020

Whole Scan Image of Underlapped FieldsQuestion

Can the uScope Navigator software create a whole-scan image for a scan that was created with no overlap or with underlapped fields?


Yes. This is supported in uScope Navigator v4.5 and later as shown in the image to the right. The whole scan image will have a gap (or gutter) between fields since they do not overlap.

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2024 Microscopes International, LLC. All rights reserved.