Support
Whole-Scan Image for Non-Overlapped Fields
Whole Scan Images
Information in this article applies to:
- uScope Navigator V4.5 and Later
Article ID: NWS1309 — Created: 1 Jun 2020 — Reviewed: 15 Dec 2020
Question
Can the uScope Navigator software create a whole-scan image for a scan that was created with no overlap or with underlapped fields?
Answer
Yes. This is supported in uScope Navigator v4.5 and later as shown in the image to the right. The whole scan image will have a gap (or gutter) between fields since they do not overlap.
Related Articles
- Poor Stitching on All Scans
Whole Scan Images - Images for Scan Columns 1 & 2 Do Not Overlap Correctly
Scan Mode - What are Tiled TIFF (SVS) Files?
Whole Scan Images
Rate This Article
Home 
Support Knowledge Base Whole Scan Images Whole-Scan Image for Non-Overlapped Fields
Support Knowledge Base Whole Scan Images Whole-Scan Image for Non-Overlapped FieldsContact Microscopes International or speak with your local distributor.
Copyright © Microscopes International, LLC. All rights reserved.