Support

Whole Scan Images EDF Whole Scan Image Stitch Errors
Whole Scan Images

Information in this article applies to:

  • uScope Navigator V4.6 and Later

Article ID: NWS2354 — Created: 19 Nov 2020 — Reviewed: 19 Nov 2020

Symptom

EDF Scan Stitches with Gaps Whole Scan Images created for EDF composites from multi-layer scans do not appear to stitch correctly. There are gaps above and beside many of the fields (as shown).

Cause

The most likely cause is the EDF software is cropping the output fields. This can cause the gap problems you are experiencing.

Resolution

Refer to the following knowledge base article to learn how to properly configure the EDF software.

Related Articles

Rate This Article
Contact Microscopes International or speak with your local distributor.
Copyright © 2021 Microscopes International, LLC. All rights reserved.